In short
Garage door cables in Rye fail from rust at the bottom corner, from wear, or when a spring breaks and lets them go slack. Both cables are replaced together and the door is re-balanced, since a new cable on a badly balanced door will not last.
Cable problems in Rye
Rye has a long waterfront, and in Milton Point, Greenhaven, Rye Gardens and around Oakland Beach, salt air rusts garage door cables at the bottom corners of the door, where they loop onto their brackets. Broken strands there are the warning. Indian Village sits along Blind Brook, which flooded during Irene and again during Ida; garages that took on water should have their cables, bottom brackets and rollers replaced together, because corrosion keeps working inside the strands. Many of Rye's Tudor and Colonial Revival homes have older garages that have settled, so doors lift unevenly and one cable carries extra load. Some of those garages still use extension springs that need safety cables through them. In Loudon Woods and near the City Center, two-car doors that open many times a day wear cables through use alone. A technician replaces cables in pairs so the door stays level.
What a failing cable looks like
Garage door cables are thin braided steel, and they wear from the bottom up, because water and grit collect at the bottom corners of the door. Watch for fraying near the bottom bracket, a cable that has jumped a groove on the drum, or slack on one side when the door is open. If the door has dropped on one side and wedged itself in the tracks, a cable has come off or snapped. A broken spring can cause the same picture, since the cables go slack the moment spring tension is lost.
A repair that needs the right tools
Resetting or replacing a cable means taking the tension off the springs, and on a torsion system that is done with steel winding bars, one quarter-turn at a time, with the door clamped in place. Locking pliers on the track and a pair of screwdrivers are not a substitute. Most injuries with garage doors happen during exactly this kind of home repair. The safe course is simple: leave the door alone, keep people away from it, and let a technician release the tension in a controlled way.
How a cable repair is done
A proper repair finds out why the cable failed. If it rusted through, the bottom brackets and the other cable are in the same condition. If it jumped the drum, something made the door go slack on one side: a weak or broken spring, a worn drum, a bent track or an object under the door. That cause is fixed along with the cables. New cables are fitted on both sides, the door is levelled, spring tension is set, and the travel and force of the opener are checked so it stops pushing against a door that is already closed.
Around Rye
- Greenhaven: Large homes along Greenhaven harbor near the Marshlands Conservancy, with constant salt exposure.
- Milton and Milton Point: The peninsula by Milton Harbor and Rye Golf Club, with waterfront homes and salt wear on hardware.
See the full Rye service area.