In short
A door that jumped its track or has a loose cable is unsafe to run. Leave it where it is and call. In Rye, a technician secures the door, fixes the cables and rollers, and lines the track up with the opening.

Track problems in Rye
Salt corrodes the lag screws and angle brackets holding tracks to the wall, and in Milton Point and Greenhaven a bracket can rust through without much warning. After a flood, rollers are often full of grit and the bottom of the track rusts quickly.
The technician replaces corroded fasteners and rollers and lines the track up with the opening so the door runs without binding.
Why doors come off track
- A car or mower bumped the door or the track.
- A lift cable snapped or slipped off its drum, so one side dropped.
- Rollers wore out and jumped the track.
- Track brackets loosened and the tracks spread apart.
- The opener kept pulling after something blocked the door.
Until it's fixed
Stop using the door and disconnect the opener. A door that's partly out of its track is held up by tension and luck, so don't stand under it or try to force it back in yourself.
What the repair includes
- Securing the door and setting it back on the tracks.
- Replacing broken or frayed cables, damaged rollers and cracked hinges.
- Straightening or replacing bent track and re-anchoring loose brackets.
- Re-balancing the springs and testing the opener's safety reverse.
Around Rye
- Rye Gardens: A mix of older homes and new construction near the Sound.
- Oakland Beach and Loudon Woods: Near Rye Town Park and the beach, with Colonials and Tudors and coastal air.
See the full Rye service area.
Questions we hear in Rye
We're in Milton Point. How do we make the door last?
Corrosion-resistant springs, galvanized or stainless hardware and a composite or fiberglass door cope with salt far better.